Related Manuals for Wincor Nixdorf F2 ULV- CPU
Summary of Contents for Wincor Nixdorf F2 ULV- CPU
- Page 1 POS Motherboard INTEL CELERON M ULV 1GHz Zero Cache Processor INTEL CELERON M ULV 373 1GHz Processor (F2-ULV-CPU) User Manual (Edition April 2007)
- Page 2 The reproduction, transmission or use of this document or its contents is not permitted without express authority. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability; technical modifications possible. Copyright ©Wincor Nixdorf International GmbH, 2007...
-
Page 3: Table Of Contents
Contents Introduction .............................. 1 Highlights ............................. 2 Mechanical Dimensions........................... 3 Functional Blocks..........................4 Technical Data............................5 Plugin Cards Risercard ........................8 Block Diagram including connectors ....................... 9 Mechanical Arrangement........................10 Onboard Components ........................... 11 Microprocessors:..........................11 Graphics System..........................11 I/O Controller............................11 Firmware HUB ........................... - Page 4 Power Failure ..........................19 Connector Assignments ........................20 Connectors for external Connections ....................20 Serial Interfaces COM1, COM2* (ONBOARD) ................20 Keyboard/Mouse Interface (external)..................... 20 Serial Interfaces COM3*, COM4*....................21 USB Interface USB1, USB2 (Onboard)..................21 USB Interface USB3PLUS, USB4PLUS, USB5PLUS (USBPLUS ADAPTER)......21 CRT Connection..........................
- Page 5 Product name: ..........................38 Bios version:........................... 38 Ethernet MAC-Address: ......................... 38 System, Main board, Power Supply: ....................38 Main Menu ............................38 System Time [XX: XX: XX]......................38 System Date [XX/XX/XXXX] ......................38 Primary & Secondary Master/Slave ....................39 SMART Monitoring ......................... 41 Extended Memory: XXX MB ......................
- Page 6 Hardware Monitor........................... 46 Boot Menu............................47 Boot Order [Follow Setup Order]....................47 Exit Menu ............................47 Exit Saving Changes ........................47 Exit Discarding Changes ........................ 48 Load Setup Defaults........................48 Discard Changes..........................48 Test points codes ..........................48 Additional Test points codes ......................54 Abbreviations ............................
-
Page 7: Introduction
F2 ULV-CPU Introduction The F2 ULV- CPU is the base to start the new class of BEETLE “Sealed Systems” like BEETLE /MX, /SX and /NetX. Benefit of the used microprocessor family known as Celeron M ULV (Ultra Low Voltage) is the low power consumption (Thermal Design Power) of TDP = 5,5W. -
Page 8: Highlights
F2 ULV-CPU Highlights LAN integrated onboard Use of available DDR2 RAM 333 (PC2700), 256 and 512Mbit technology Min. Main Memory 256MB; Max Main Memory 2GB Use of existing PCI Slot cards Onboard PCI connector for PCI based Plug-in modules: Support of introduced Secon- dary CRT Controller and Secondary TFT Controller ... -
Page 9: Mechanical Dimensions
F2 ULV-CPU Mechanical Dimensions Mechanical dimensions of F2-CPU-ULV The bracket/ connector outlets of the motherboard are similar to F1-ULV. The formfactor of the bareboard is similar to the D2*- CPU. Therefore, the F2-CPU-ULV is able to support the sys- tems BEETLE/MII, BEETLE/SII, BEETLE/iPOS and BEETLE/X family. Long term availability CELERON M ULV and chipset 910GML are supported by the INTEL IPD (Infrastructure Proc- essor Devision) “Embedded”... -
Page 10: Functional Blocks
F2 ULV-CPU Functional Blocks Celeron M ULV 1GHz FSB 400; 512 KB or ZC DOTHAN-Core; 90nm uFCBGA 479 pin, 35x35mm FSB400 AGTL+ CRT- BRIDGE CHIPSET 910GM GMCH DDR2 RAM INTERNAL GRAPHICS GRAPHIC MEMORY 333Mhz PC2700 GRAPHIC MEDIA ACCE- CONTROLLER HUB max 2GB LERATOR uFCBGA 1257 pin;... -
Page 11: Technical Data
F2 ULV-CPU Technical Data Supported Systems: BEETLE /M II, BEETLE /S II, BEETLE /X BEETLE /iPOS Architecture: PC-AT compatible and POS - specific functional units Operating Modes: Normal Mode, Power Save Mode Power Management ACPI 1.0, APM 1.2 ... - Page 12 F2 ULV-CPU Sound controller: CS4299 Audio Codec controller with the following AC`97 functions: 20 Bit Stereo DAC and 18 Bit Stereo ADC Mono Mic Input (MIC) Stereo Line-Level Output Sound connection: Mono Microphone Input, Stereo Speaker Output (2 x 1, 25 W@ 8 Ohm) ...
- Page 13 F2 ULV-CPU USB connection: general: USB1.1, USB 2.0 USB1, 2: Standard 2 port connector, series A USB3, 4, 5: Standard 1 port connector + power (i.e. BERG 74239-x00) (USBplus- adapter with +5V system voltage), Optional and alternative to COM3*, COM4*- adapter USB6, 7, 8: 1 x 6 pin header (USB6 used for uDoc, USB8 used for USB- Hub)
-
Page 14: Plugin Cards Risercard
F2 ULV-CPU Fuses (Polyswitches): +5V: COM2*, COM3*, COM4*, USB1, USB2, Keyboard, Mouse Powered USB (Fuse on adapter) +12V: COM2* COM3*, COM4* (Fuse on adapter) Powered USB (Fuse on adapter) +24V: Powered USB (Fuse on adapter) Board Dimensions: ca. -
Page 15: Block Diagram Including Connectors
F2 ULV-CPU Block Diagram including connectors Main board F2 ULV- CPU... -
Page 16: Mechanical Arrangement
F2 ULV-CPU Mechanical Arrangement The CPU comprises of the printed circuit board with connectors for all external peripheral connections and for installing the optional plug-in cards. NVRAM MS/E BIOS KYB/ COM1 ICH6M COM2* ATX- USB1/ USB2 Battery USB8 PCI-ONBOARD Celeron ULV GMCH 10/100 SDVO... -
Page 17: Onboard Components
F2 ULV-CPU Onboard Components Microprocessors: INTEL CELERON M ULV 1GHz Processor without Cache (ZC) INTEL CELERON M ULV 373 1GHz Processor 512KB Graphics System The GMCH integrates a system memory DDR SDRAM controller that supports 256MB up to 2GB memory (233MHz). It also contains a graphic controller for enhanced integrated 2D and 3D graphics performance. -
Page 18: Super I/O-Controller
F2 ULV-CPU five general purpose inputs, register based block locking and hardware based locking. It operates under the LPC/FWH interface protocol. The Firmware Hub is housed in a 32pin PLCC. Super I/O-Controller The PC87366 is a Low Pin Count Interface-based highly integrated Super I/O and provides the following functions: ... -
Page 19: Hardware Monitoring
F2 ULV-CPU The ICS954204 provides an I C (2 wire) interface to program the internal registers. For EMI reduction the synthesizer provides integrated LCD spread spectrum. The ICS954204 is housed in 56 pin TSSOP package. Hardware Monitoring The PC87366 contains an enhanced Hardware Monitor which will be used for sensing/ con- trolling the following signals: ... -
Page 20: 32Bit Pci Onboard Plug-In Module Interface
F2 ULV-CPU 32Bit PCI Onboard Plug-In Module Interface The Onboard 32 bit PCI bus interface is provided to assemble PCI bus based Plug-In- Modules. The PCI bus interface contains all signals necessary for a PCI Master module. Furthermore, the WOL interface is provided, i.e. the Standby Voltage and the Wake On signal are available. LAN 10/100 Interface The ICH6M contains the control logic for the LAN interface and together with the Platform LAN Connect (82562GT) it provides the LAN 10/100 interface. -
Page 21: Usb Interface
F2 ULV-CPU USB Interface The USB interface supplied by the ICH6M contains one EHCI controller with 8 downstream ports providing high speed data rate (480Mb/sec, USB 2.0) and 4 UHCI controllers (2 ports each) for full and low speed data rate (12 Mb/sec and 1.5Mb/sec, USB1.1). USB ports 1 and 2 are available on the main board. -
Page 22: Cash Drawer Interface
F2 ULV-CPU Cash Drawer Interface The logic for controlling the cash drawers is placed on the F2- CPU. The I/O assignment is compatible to other CPU´s in BEETLE systems. Input031x/ bit6 LAZU1N=0 Cash drawer 1 closed or not present (x = 0 – 7) LAZU1N=1 Cash drawer 1 open Input031x/ bit7... -
Page 23: Status Display Interface
F2 ULV-CPU Status Display Interface HD-LED at STATUS OF SYS- POWER-LED at FRONT FRONT of B/MII for REMARKS of B/MII for F2CPU F2CPU AC OFF STANDBY AND SOFTOFF AC ON SYSTEM VOLTAGES 3,3V; 5V; 12V; 24V POWER ON AVAILABLE BIOS START IS WORKING BIOS START PROPERLY... -
Page 24: Changing The Cpu Battery
The lithium battery must be replaced only by identical batteries or types recommended by Wincor Nixdorf International. You can return the used batteries to your Wincor Nixdorf International sales outlet. Batteries containing harmful substances are marked accordingly. The chemical denotations are as follows: CD = Cadmium;... -
Page 25: Operating Modes
F2 ULV-CPU Operating Modes General The F2- CPU provides power management functions dependent on the installed Operating system. The BIOS supports ACPI 1.0 and APM 1.2. (for details see the BIOS description) Normal Mode / Standby Mode Switching on Power Supplies w/ and w/o UPS functionality will be used in F2- CPU based systems. Con- necting the PSU via AC line the Standby voltage P5VSB is supplied and the system is ready to be switched on (Standby mode). -
Page 26: Connector Assignments
F2 ULV-CPU Connector Assignments Connectors for external Connections Serial Interfaces COM1, COM2* (ONBOARD) X15, 9-pin D-sub connector, male X16 , 9-pin D-sub connector (voltages assigned), female PIN # COM1 COM2* DCD1F P12VFS RXD1F RXD2F TXD1F TXD2F DTR1F DTR2F GNDF GNDF DSR1F DSR2F RTS1F... -
Page 27: Serial Interfaces Com3*, Com4
F2 ULV-CPU Serial Interfaces COM3*, COM4* These connectors are not part of the F2- CPU. They are part of the COM-Adapter and, if populated, available at the rear side of the cabinet. 9-pin D-sub connector (voltages assigned), female PIN # SIGNALS COM3* SIGNALS COM4* P12VFS... -
Page 28: Crt Connection
F2 ULV-CPU CRT Connection This connector is not part of the F2- CPU. It is part of the CRT-Adapter and, if populated, available at the rear side of the cabinet. 15-pin HDD sub connector (CRT), female PIN # SIGNALS VID GREEN BLUE 5VFU... -
Page 29: Lan Connection
F2 ULV-CPU LAN Connection X26, 12 pin RJ45 (LAN), female PIN # SIGNALS TX + TX - LEDG P3VSB LEDY P3VSB Speaker out X39, 5-pin, 3.5mm female connector PIN # SIGNALS OUT AGND LOLAF LORAF Microphone X38, 5-pin, 3.5mm female connector PIN # SIGNALS MIC AGND... -
Page 30: Connectors For Internal Connections
F2 ULV-CPU Connectors for internal Connections Main Memory X1, X2, 2 x 84 pin micro edge connector PIN # SIGNALS DIMM0, 1 PIN # SIGNALS DIMM0, 1 RAMREF SA_DQ0 SA_DQ4 SA_DQ5 SA_DQ1 P2V5 SA_DQS0 SA_DM0 SA_DQ2 SA_DQ6 P2V5 SA_DQ7 SA_DQ3 SA_MA13 SA_DQ8 P2V5... - Page 31 F2 ULV-CPU PIN # SIGNALS DIMM0,1 PIN # SIGNALS DIMM0,1 P2V5 SM_CK2# SA_MA0 SA_MA10 P2V5 SA_BS1 SA_DQ32 P2V5 SA_DQ36 SA_DQ33 SA_DQ37 SA_DQS4 P2V5 SA_DQ34 SA_DM4 SA_DQ38 SA_BS0 SA_DQ39 SA_DQ35 SA_DQ40 SA_DQ44 P2V5 SA_RAS# SA_WE# SA_DQ45 SA_DQ41 P2V5 SA_CAS# SM_CS0# SM_CS1# SA_DQS5 SA_DM5 SA_DQ42...
-
Page 32: Sata1, Sata2
F2 ULV-CPU SATA1, SATA2 X42, X43, 1 x 7 pin Header PIN # SIGNALS SATA1 PIN # SIGNALS SATA2 SATA0TXP SATA2TXP SATA0TXN SATA2TXN SATA0RXN SATA2RXN SATA0RXP SATA2RXP Hard Disk (IDE) X23, 2 x 22-pin header, 2mm PIN # SIGNALS IDE1 PIN # SIGNALS IDE1 IDERESN IDE_DD7... -
Page 33: Crt-Adapter
F2 ULV-CPU CRT-Adapter X72, 2 x 8 pin Berg Header PIN # SIGNALS CRT PIN # SIGNALS CRT CRT_RED CRT_GREEN 4 CRT_BLUE CRTPR# DDCSDA HSYNC CRT_RED# VSYNC CRT_GREEN# DDCSCL CRT_BLUE# SDVO-Interface X73, 2 x 19 pin Berg Header PIN # SIGNALS TFT PIN # SIGNALS TFT PLTRST#... -
Page 34: Com 3*, 4* Adapter
F2 ULV-CPU COM 3*, 4* Adapter X22A, X22B 2 x 13 pin Berg Header PIN # SIGNALS PIN # SIGNALS P12V N12V DTR3N RXD33 RI3N DCD3N TXD33 RTS3N DSR3N CTS3N DTR4N RXD44 RI4N DCD4N RTS4N TXD44 CTS4N DSR4N PoweredUSB Adapter X122, 2 x 22 pin Berg Header PIN # SIGNALS... -
Page 35: Usb 6, 7, 8
F2 ULV-CPU USB 6, 7, 8 X17, X4, X40 1 x 6-pin header PIN # SIGNALS USB6 SIGNALS USB7 SIGNALS USB8 P5V_USB6 P5V_USB7 P5V_USB8 USBM6 USBM7 USBM8 USBP6 USBP7 USBP8 OVL6 OVL7 OVL8 PS/2 MOUSE X12, 1 x 4-pin header PIN # SIGNALS PS/2 MSCKF... - Page 36 F2 ULV-CPU PIN” SIGNALS A SIGNALS B CBE0# P3V3 P3V3 AD10 AD11 P3V3 AD12 AD13 P3V3 AD14 AD15 CBE1# SMBCL# SERR# PERR# SMBDA STOP# DEVSEL# IRDY# TRDY# WAKE# FRAME# CBE2# PLT_RST# AD16 AD17 AD18 AD19 AD20 AD22 AD21 AD23 CBE3# AD24 AD25 AD26...
-
Page 37: Pci-Onboard
F2 ULV-CPU PCI-ONBOARD X6, 80-pin board to board connector PIN # SIGNALS PCI PIN # SIGNALS PCI P12V PV3C WOLN P5VSB PCICLK4 PIRQ3N PIRQ1N PIRQ2N PIRQ0N PCIRNB PREQ0N PGNT0N AD31 AD30 AD29 AD28 AD27 AD26 AD25 AD24 CBE3N AD23 AD21 AD22 AD19 AD20... -
Page 38: Speaker
F2 ULV-CPU Speaker X9, 1 x 4-pin dubox header PIN # SIGNALS SP RSVB NVRAM Adapter X8, 2 x 13 pin Berg Header PIN # SIGNALS P3V3C P3V3C VCCRTC LAD0FWH0 LAD1FWH1 LAD2FWH2 LAD3FWH3 LAD4FWH4 PLTRST# NVRAM_PR NVR_WP PCICLK... -
Page 39: Power Supply Unit
F2 ULV-CPU Power Supply Unit X34, 2 x 10-pin header PIN # SIGNALS POW1 PIN # SIGNALS POW1 PWGOOD P12V P12V N12V DCFAILN P5VSB PWRONN X33, 2 x 9-pin header PIN # SIGNALS POW2 PIN # SIGNALS POW2 P3V3C P3V3C P3V3C P3V3C P3V3C... -
Page 40: Status Display
F2 ULV-CPU Status Display X10, 1 x 4-pin dubox header PIN # SIGNALS LED LEDSTB LEDHD FAN Connector 1 (System; e.g. BEETLE NetX or MX)) X21, 1 x 3-pin header PIN # SIGNALS FAN1 P12V FAN_RPM1 FAN_PWM1 FAN Connector 2 (System; e.g. BEETLE /SX) X14, 1 x 3-pin header PIN # SIGNALS FAN2... -
Page 41: Bios Setup
F2 ULV-CPU BIOS Setup The Celeron M / Pentium M main board comes with a Phoenix BIOS chip that contains the ROM Setup information of your system. This chip serves as an interface between the processor and the rest of the main board’s components. This section explains the information contained in the Setup program and tells you how to modify the settings according to your system configuration. -
Page 42: Legend Bar
F2 ULV-CPU Legend Bar At the bottom of the Setup screen you will notice a legend bar. The keys in the legend bar allow you to navigate through the various setup menus. The following table lists the keys found in the legend bar with their corresponding alternates and functions. -
Page 43: General Help
F2 ULV-CPU General Help In addition to the Item Specific Help window, the BIOS setup program also provides a General Help screen. This screen can be called from any menu by simply pressing <F1> or the <Alt> + <H> combi- nation. -
Page 44: Product Name
F2 ULV-CPU Product name: This text is fixed for your Celeron M / Pentium M main board with standard BIOS. This board is also called “F2-CPU-Standard”. Bios version: The Bios version is displayed in the release format xx/yy, followed by date of release in international format. -
Page 45: Primary & Secondary Master/Slave
F2 ULV-CPU Primary & Secondary Master/Slave The first 2 lines are info lines about the attached S-ATA hard disks, while the next two are using for the older P_ATA disks. Note: Before attempting to configure a hard disk drive, make sure you have the configuration informa- tion supplied by the manufacturer of the drive. - Page 46 F2 ULV-CPU Heads This field configures the number of read/write heads. Refer to your drive documentation to determine the correct value to enter into this field. To make changes to this field, the Type field must be set to [User]. Sector This field configures the number of sectors per track.
-
Page 47: Smart Monitoring
F2 ULV-CPU SMART Monitoring This field informs about the enabling of the S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) system which utilizes internal hard disk drive monitoring technology. This field is read only. Extended Memory: XXX MB This field displays the amount of extended memory detected by the system during bootup. You do not need to make changes to this field. -
Page 48: Legacy Usb Support [Disabled]
F2 ULV-CPU Legacy USB Support [Disabled] This motherboard supports Universal Serial Bus (USB) devices. The default of [Disabled] the USB controller is disabled no matter whether you are using a USB device or not. The enabling of the con- troller will run with the help of a USB compliant operating system like Windows XP or else. If the point stands on [Enabled] the legacy USB support from the BIOS is started. -
Page 49: Chipset Configuration
F2 ULV-CPU Chipset Configuration SMART Device Monitoring: [Disabled] Boot-Video Device: [Onboard] USB 2.0 Support [Enabled] SMART Device Monitoring [Disabled] This field controls the enabling of the S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technol- ogy) system which utilizes internal hard disk drive monitoring technology. Configuration options: [Disabled] [Enabled]. -
Page 50: I/O Device Configuration
F2 ULV-CPU I/O Device Configuration Serial port A: [Enabled] Base I/O address: [3F8] Interrupt: [IRQ 4] Serial port B: [Enabled] Base I/O address: [2F8] Interrupt: [IRQ 3] Touch Screen Routing: [TFT Touch to COM2] Serial port A [Enabled], Serial port B [Enabled] These fields don’t configure the Serial ports directly. -
Page 51: View Dmi Event Log [Enter]
F2 ULV-CPU View DMI event log [Enter] This setup point is useful to display the recorded DMI events like a defect floppy disk controller or any- thing else. If there is an error stored, the BIOS will display a message every time the system is starting Clear all DMI event logs [No] With this point it is possible to clear all the recorded DMI events manually. -
Page 52: After Power Failure [Stay Off]
F2 ULV-CPU After Power Failure [Stay off] Select whether you want your system to be rebooted after power has been interrupted. [Stay off] leaves your system off and [Restore] reboots your system if it was active before power loss. Is the key [Follow AC/Power] selected, the system will startup anytime power is available. -
Page 53: Boot Menu
F2 ULV-CPU CPU Fan#x Speed (xxxxrpm) The onboard hardware monitor is able to detect the CPU fan speed and power supply fan speed in rotations per minute (rpm). The presence of the fans is automatically detected. Several Voltages [xx.xV] The onboard hardware monitor is able to detect the voltage output by the onboard voltage regulators. Boot Menu Boot Order [Follow Setup Order]... -
Page 54: Exit Discarding Changes
F2 ULV-CPU Exit Discarding Changes This option should only be used if you do not want to save the changes you have made to the Setup program. If you have made changes to fields other than system date, system time, and password, the system will ask for confirmation before exiting. Load Setup Defaults This option allows you to load the default values for each of the parameters on the Setup menu. - Page 55 F2 ULV-CPU POST Code Name Description (Hex) VERIFY_REAL IF <in port mode> THEN Turn on A20 Reset Processor ENDIF DISABLE_NMI Disable non-maskable Interrupts GET_CPU_TYPE IF <cold boot> THEN Store reset DX value in CMOS Determine CPU manufacturer and type Store CPU manufacturer and type in CMOS ENDIF HW_INIT Reset all DMA controllers.
- Page 56 F2 ULV-CPU POST Code Name Description (Hex) 8742_TEST Read 8742 self-test results. IF <self-test failed> THEN Halt. ELSE Read system info from 8742 Set 8742 command byte. ENDIF SET_HUGE_ES Go into protected mode. Set ES, DS, SS, FS, and GS to 4Gb. SIZE_RAM Determine the size of each DRAM bank.
- Page 57 F2 ULV-CPU POST Code Name Description (Hex) ADV_CS_CONFIG IF <CMOS is valid (checksum good and battery good) THEN Load DRAM controller configuration registers with values from CMOS fields. ENDIF ADV_REG_CONFIG IF <CMOS is valid> THEN Load ISA controller configuration registers with values from CMOS fields and load any other configuration registers with values from CMOS fields.
- Page 58 F2 ULV-CPU POST Code Name Description (Hex) CPU_CACHE_OFF Disable and WB invalidate CPU cache. MEMORY_TEST Determine amount of memory below 1M. Walk a1 through data bus at 80000h. walk a 0 through data bus at 80000h. Check for stuck address line from 80000h to 8FFFFh. EXT_MEMORY Determine total amount of memory by doing a read/write test.
- Page 59 F2 ULV-CPU POST Name Description Code (Hex) POST_CONFIG_MCD Initialize Mother Board Configurable devices. BIOS_INIT Initialize timeouts, key buffer, soft reset flag. ENABLE_NMI Enable NMI. INIT_EXT_BDA Initialize the extended BIOS data area. MOUSE IF <mouse support enabled> THEN Setup interrupt vector for mouse. Add mouse support to equipment installed flag.
-
Page 60: Additional Test Points Codes
F2 ULV-CPU POST Name Description Code (Hex) KEY_RATE Initialize keyboard typematic rate. SCAN_FOR_F2 IF <2 key was pressed during POST> THEN Set flag indicating key press. Display “Entering Setup” message. ENDIF SETUP_CHECK IF <2 was pressed> THEN Enter Setup. ELSE IF <errors were found> THEN Display “Press 7 or 2”... - Page 61 F2 ULV-CPU...
-
Page 62: Abbreviations
F2 ULV-CPU Abbreviations AGTL+ Assisted Gunning Transceiver Logic Advanced Power Control Advanced Power Management Advanced Technology AT Attachment Ball Grid Array BIOS Basic Input and Output System CPLD Complex Programmable Logic Device Central Processing Unit Cathode-ray Tube DIMM Dual Inline Memory Module Digital Video Interface Extended Capabilities Port EEPROM... - Page 63 Wincor Nixdorf International GmbH D-33094 Paderborn Order No. / Bestell-Nr.: 01750133772A...
Need help?
Do you have a question about the F2 ULV- CPU and is the answer not in the manual?
Questions and answers