NEC PH3501QL User Manual page 64

PICTURE: Controls the video adjustment of the projector.
BRIGHTNESS ▲ .... Increases the brightness adjustment value.
BRIGHTNESS ▼ .... Decreases the brightness adjustment value.
CONTRAST ▲ ........ Increases the contrast adjustment value.
CONTRAST ▼ ........ Decreases the contrast adjustment value.
COLOR ▲ .............. Increases the color adjustment value.
COLOR ▼ .............. Decreases the color adjustment value.
HUE ▲ ................... Increases the hue adjustment value.
HUE ▼ ................... Decreases the hue adjustment value.
SHARPNESS ▲ ..... Increases the sharpness adjustment value.
SHARPNESS ▼ ..... Decreases the sharpness adjustment value.
SOURCE SELECT: This switches the input connector of the projector.
HDMI1 ................... Switches to the HDMI 1 IN terminal.
HDMI2 ................... Switches to the HDMI 2 IN terminal.
DisplayPort1 .......... Switches to the DisplayPort1 IN terminal.
DisplayPort2 .......... Switches to the DisplayPort2 IN terminal.
HDBaseT ................ Switch to image input sent from a transmission device that supports HDBaseT.
SDI1 ...................... Switches to the SDI1 IN terminal.
SDI2 ...................... Switches to the SDI2 IN terminal.
SDI3 ...................... Switches to the SDI3 IN terminal.
SDI4 ...................... Switches to the SDI4 IN terminal.
SLOT ...................... The projector switches to video input from the optional board when an optional board (sold separately) is
equipped on.
PROJECTOR STATUS: This displays the condition of the projector.
LIGHT HOURS USED1 ........Displays how many hours the light module[1] has been used.
LIGHT HOURS USED2 ........Displays how many hours the light module[2] has been used.
FILTER HOURS USED .........Displays how many hours the filter has been used.
ERROR STATUS ..................Displays the status of errors occurring within the projector.
LOG OFF: Logging off your projector and returning to the authentication screen (LOGON screen).
47
3. Convenient Features