NEC PH3501QL User Manual page 39

3. Turn on the light power switch ([1]) then the projector power switch ([2]) on the side of the projector.
The POWER indicator lights up orange.
• The buzzer sound is released when [NOTIFICATION SETTING] for [BUZZER] is ON.
(→ page 104)
ON
OFF
Light power switch
WARNING
The projector produces a strong light. When turning on the power, make sure no one within projection range is
looking at the lens.
4. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator goes from a steady orange light to
a steady green light, and the picture is projected on the
screen.
• If using the remote control, press the POWER ON but-
ton.
• When there is no signal the unit will project a blue
screen (factory default menu settings).
• If the picture is blurry, adjust the screen focus. (→ page
32)
• When it is dark press the
panel backlight and the LED lamp on the right side of
the projector will turn on. (→ page 11)
TIP:
• The lens shutter remains closed even when the power is turned
on with the Power On Shutter function. (→ page 98)
• Pressing the button will not activate the unit when the KEY LOCK
indicator is flashing orange. (→ page 36)
• When the message "PROJECTOR IS LOCKED! ENTER YOUR
PASSWORD." is displayed, it means that the [SECURITY]
feature is turned on. (→ page 42)
After you power on your projector, ensure that the com-
puter or video source is turned on.
NOTE: The blue screen ([BLUE] background) is displayed when no
signal is being input (by factory default menu settings).
(lights) button. The indicator
2. Projecting an Image (Basic Operation)
Projector power switch
Standby
Steady orange
light
(→ page 149)
22
OFF
ON
Blinking Power On
Blinking green Steady green
light light