❺ Selecting A Source - NEC PH3501QL User Manual

❺ Selecting a Source
Selecting the computer or video source
NOTE: Turn on the computer or video source equipment connected to the projector.
Using the Direct button
Press the Direct button on the projector cabinet or remote control.
Select the input according to the connection terminal.
Input connector
HDMI1/2 IN
DisplayPort 1/2 IN
SDI 1/2/3/4 IN
HDBaseT
SLOT
NOTE:
• The indicator next to each button on the main unit operation area operates as follows.
When a signal is input: lights up in white.
* For SLOT, this is when optional boards (sold separately) are installed and the power is on.
When an input is selected: lights up in green.
Button on the projector
cabinet
HDMI
DisplayPort
3G/HD/SD-SDI
HDBaseT
SLOT
2. Projecting an Image (Basic Operation)
Button on the remote
control
HDMI Switches between HDMI1 and HDMI2 each time
it is pressed.
DisplayPort Switches between DisplayPort1 and DisplayPort2
each time it is pressed.
AUX Switches between SDI1, SDI2, SDI3 and SDI4
each time it is pressed.
NETWORK
SLOT
25
Note
—
—