NEC PH3501QL User Manual page 139

① HDMI cable (not supplied)
• Use a certified High Speed HDMI
• When connecting the HDMI 1 IN or HDMI 2 IN connector of the projector to the Blu-ray player, the projector's video
level can be made settings in accordance with the Blu-ray player's video level. In the menu select [ADJUST] →
[VIDEO] → [VIDEO LEVEL] and make necessary settings.
② DisplayPort cable (not supplied)
• Use a certified DisplayPort cable.
③ BNC cable (not supplied)
• Use cables that are 5C-FB or higher (5C-FB, 7C-FB, etc.) or Belden 1694A or higher. In addition, use cables with
a cable length 100m or less.
• The length of cables that can be used may differ, depending on the signal.
④ LAN cable (not supplied)
• Please use a shielded twisted pair (STP) cable of Category 5e or higher for the LAN cable (sold commercially).
• The HDBaseT port of the projector supports HDMI signals (HDCP) from transmission devices, control signals from
external devices (serial, LAN) and remote control signals (IR commands).
• The maximum transmission distance over the LAN cable is 100 m. (the maximum distance is 70 m for a 4K signal)
• Please do not use other transmission equipment between the projector and transmission equipment. The picture
quality may be degraded as a result.
• This projector is not guaranteed to work with all HDBaseT transmission devices sold commercially.
After turning on the power of the unit, select the input according to the connection terminal.
Input connector
HDMI1/2 IN
DisplayPort 1/2 IN
SDI 1/2/3/4 IN
HDBaseT
Cable or High Speed HDMI
®
Button on the projector
cabinet
HDMI
DisplayPort
3G/HD/SD-SDI
HDBaseT
Cable with Ethernet.
®
Button on the remote
control
HDMI Switches between HDMI1 and HDMI2 each time
it is pressed.
DisplayPort Switches between DisplayPort1 and DisplayPort2
each time it is pressed.
AUX Switches between SDI1, SDI2, SDI3 and SDI4
each time it is pressed.
NETWORK
122
6. Connecting to Other Equipment
Note
—