NEC PH3501QL User Manual page 2

Ver. 1 1/18
This device is used in combination with the LV kit (NP-LV01BD, sold separately) and the projector main unit. The
picture sent from the connected device is then projected onto the screen. Note that it cannot be used with just the
projector main unit.
This User's Manual explains mainly operation of the PH3501QL used in combination with NP-LV01BD.
• Apple, Mac, and MacBook are trademarks of Apple Inc. registered in the U.S. and other countries.
• Microsoft, Windows, and PowerPoint are either a registered trademark or trademark of Microsoft Corporation in the
United States and/or other countries.
• Cinema Quality Picture logo, NaViSet and Virtual Remote are trademarks or registered trademarks of NEC Display
Solutions, Ltd. in Japan, in the United State and other countries.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
• DisplayPort™ and the DisplayPort™ logo are trademarks owned by Video Electronics Standards Association (VESA
in the United States and other countries.
• HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
• DLP and the DLP logo are trademarks or registered trademarks of Texas Instruments in the United States and other
®
countries.
• PJLink trademark and logo are trademarks applied for registration or are already registered in Japan, the United
States of America and other countries and areas.
• Blu-ray is a trademark of Blu-ray Disc Association.
• Extron and XTP are registered trademarks of RGB Systems, Inc. in the United States.
• Ethernet is either a registered trademark or trademark of Fuji Xerox Co., Ltd.
• Other product and company names mentioned in this user's manual may be the trademarks or registered trademarks
of their respective holders.
• Virtual Remote Tool uses WinI2C/DDC library, © Nicomsoft Ltd.
NOTES
(1) The contents of this user's manual may not be reprinted in part or whole without permission.
(2) The contents of this user's manual are subject to change without notice.
(3) Great care has been taken in the preparation of this user's manual; however, should you notice any questionable
points, errors or omissions, please contact us.
(4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters deemed
to result from using the Projector.
)
®