Omron NX-ID3343 User Manual page 172

6 Digital Input Units
4
Click the Transfer to Unit Button.
The settings are transferred from the Sysmac Studio to the NX Unit.
The settings are reflected after the Unit is restarted.
Precautions for Safe Use
The Unit is required to restart after the transfer of Unit operation settings on the Sysmac Studio
is completed. Always sufficiently check the safety at the connected devices before you transfer
the Unit operation settings.
Precautions
Note that when you use this function, the time for which the input value actually turns ON or turns OFF
is delayed from the initial input to the input terminals until ON delay time or OFF delay time in the follow-
ing table.
Delay time
ON delay time
OFF delay time
6 - 20
ON response time + input filter time
OFF response time + input filter time
Description
NX-series Digital I/O Unit User's Manual (W521)