Attaching The Optional Security Cable - X-Rite 500 Series Operator's Manual

Attaching the Optional Security Cable

An optional security cable is available from X-Rite for
attaching the instrument to a fixed location.
To install the security cable:
1. Lock shoe in closed position next to instrument.
2. Decide which side of the instrument you want the
cable to protrude from, and remove the appropriate
shoulder bolt from the shoe with the hex wrench.
NOTE: A metal wave washer and plastic washer exists in the
opening once the shoulder bolt is removed. If washers are removed,
make sure to install them in the correct order, plastic washer first
followed by the metal wave washer.
3. Insert the new shoulder bolt with the cable attached
into the shoe and secure it with an open end or
adjustable wrench.
4. The Looped end of the cable can be secured by either
a padlock or bolted to a stationary object.
Shoulder Bolt
Security Cable
O V E R V I E W A N D S E T U P
Shoulder Bolt Opening
Plastic Washer
Metal Wave Washer
1-7