Measurement; Memory Sampling Mode; Measurement Preparation - Kanomax OMX-ADM Operation Manual

3-1-2. Measurement

3-2. Memory Sampling Mode

3-2-1. Measurement Preparation

3-2-2. Measurement
Find Quality Products Online at:
1. Turn on the unit and wait for about 10 minutes until "Ready" stop blinking and the
initializing is done.
2. Start measuring.
3. Use data filing software if necessary.
4. Turn off the unit when odor strength shows close to "0".
Refer to Page. 11.
1. Turn on the unit and wait for about 10 minutes until "Ready" stop blinking and the
initializing is done.
2. Press until sampling rate on LCD display starts blinking.
3. Select sampling rate by pressing.
4. Press to finish selecting sampling rate.
5. Press (one time) and
GlobalTestSupply
www.
(twice) to save data.
13
.com
sales@GlobalTestSupply.com