Table of Contents
Advertisement
3. Data Acquisition Software (S603-60)
4.2 Measurement
4.2.1 Starting a Measurement
1) Click [Measurement] -> [Measurement] from the menu bar.
(Or click the
2) "Measuring Parameter Setting" dialog box will be displayed. Configure each setting for a measurement.
Sampling Method
Duct Shape
3) To start a measurement based on the selected measurement setting, click [Measurement] (a).
button from the tool bar or press F4 key.)
Serial No. of the
Connected Instrument
(A)
<Measuring Parameter Setting Dialog Box>
1 ~ 600 sec
(Sampling Time)
0 ~ 2550 mm
0 ~ 255 inch
(Set width & height or diameter
for the duct to be used.)
1～65500 times
(Number of Sampling)
8
Advertisement
Table of Contents
