ADJ VIZI CMY300 User Instructions page 34

Vizi CMY300 Operating Instructions
USB Upgrade File - This submenu is used for any future software updates. Check www.adj.com
and this units webpage for any software updates. Download the software update to a flash stick and
plug the flash stick into the Flash Drive slot located on the front of the unit.
1. Contact ADJ customer service for help when updating software.
Firmware Version - With this function, you can check the current firmware version.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Information" is higlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Firmware Version" is displayed, and press ENTER. The current
firmware version will now be displayed.
3. Press the MENU button to return to the main menu.
RESET FUNCTIONS -
Pan & Tilt - With this function, you can reset the pan & tilt motors.
1. Access the main menu, and press the UP or DOWN buttons so that "Reset Functions" is higlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Pan & Tilt" is displayed, and press ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes".
To reset the pan & tilt motors, select "Yes" and press ENTER.
Effect - With this function, you can reset the effect motors.
1. Access the main menu, and press the UP or DOWN buttons so that "Reset Functions" is higlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Effects" is displayed, and press ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes".
To reset the effects motors, select "Yes" and press ENTER.
All - With this function, you can reset all of the motors.
1. Access the main menu, and press the UP or DOWN buttons so that "Reset Functions" is higlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "All" is displayed, and press ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes".
To reset all of the motors, select "Yes" and press ENTER.
SPECIAL FUNCTIONS -
Factory Setting - Within this menu, you can reset the fixture to factory settings.
1. Access the main menu, and press the UP or DOWN buttons so that "Special Functions" is higlighted, then
press ENTER.
2. "Factory Setting" will now be displayed, and press ENTER.
3. To reset the fixture to factory settings, use the UP or DOWN buttons to "Yes" and press ENTER. If you do
not wish to reset to factory settings, highlight "No" and press ENTER.
ADJ Products, LLC - www.adj.com - Vizi CMY300 User Manual Page 33