ADJ VIZI CMY300 User Instructions page 33

Vizi CMY300 Operating Instructions
Backlight Intensity - With this function, you can adjust the intensity of the display backlight.
1. Access the main menu, and press the UP or DOWN buttons so that "Display Settings" is higlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Backlight Intensity" is displayed, and press ENTER. The current set-
ting will now be displayed.
3. Use the UP or DOWN buttons to to adjust the intensity between 0-30. 0 is the lowest intensity, 30 the
brightest.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Temperature Unit - With this function, you can switch the temperature setting between Celsius or Fahrenheit.
1. Access the main menu, and press the UP or DOWN buttons so that "Display Settings" is higlighted, then
press ENTER.
2. Press the UP or DOWN buttons until "Temperature Unit" is displayed, and press ENTER. The current
setting will now be displayed.
3. Use the UP or DOWN buttons to switch between °C or °F.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
FIXTURE TEST -
Fixture Test - With this function, you can run an Auto Test or a Manual Test.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Test" is higlighted, then press
ENTER.
2. Use the UP or DOWN buttons to switch between "Auto Test" or "Manual Test".
3. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
FIXTURE INFORMATION -
Fixture Use Time - With this function, you can check the fixture running time.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Information" is higlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Fixture Use Time" is displayed, and press ENTER. The fixture
running time will now be displayed.
3. Press the MENU button to return to the main menu.
Temperature - With this function, you can check the fixture temperature.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Information" is higlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Temperature" is displayed, and press ENTER. The current fixture
temperature will now be displayed.
3. Press the MENU button to return to the main menu.
ADJ Products, LLC - www.adj.com - Vizi CMY300 User Manual Page 32