Table Of Contents - Water Depot Deluxe Series Owner's Manual

Control Valve Specifications
Control Valve Function and Cycles of Operation
General Instructions
System Setup
Setting Options Table
Bypass Valve
Installation
Installer Settings
Normal Display Settings
General Information
Start Up Instructions
Drawings and Part Numbers
MR Front Cover and Drive Assembly
WS1MR Drive Cap, Pistons and Spacer Stack
Replacement Parts
Installation Fittings Assemblies
WS1 Identification Figure
Troubleshooting
FOR INFORMATION COMMON TO ALL 1" CONTROL VALVES REFER TO THE WS1 DRAWINGS AND
SERVICE MANUAL
This unit has a control valve which enables the setting of not only the length of each regeneration cycle but also the
order in which cycles (steps of regeneration) occur. The following pages instruct how to choose the unit"s sequence
of cycles, cycle times, exchange capacity, and gallon capacity/regeneration time.
THE DEALER...
1. Read this page, GENERAL INSTRUCTIONS, INSTALLER SETTINGS, NORMAL DISPLAY SETTINGS.
2. Read the CYCLE VALVE FUNCTION AND CYCLES OF OPERATION.
3. Complete the SYSTEM SETUP.
THE INSTALLER...
1. Read Bypass Valve page.
2. Read GENERAL INSTRUCTIONS, NORMAL DISPLAY SETTINGS.
3. Be sure CYCLE VALVE FUNCTION AND CYCLES OF OPERATION and SYSTEM SETUP are done
before leaving for installation.
4. Follow INSTALLATION instructions, INSTALLER SETTINGS, TIME OF DAY.
5. Follow START UP INSTRUCTIONS.

TABLE OF CONTENTS

PRE-INSTALLATION INSTRUCTIONS
1
2
3
7
8
11
12
13
15
16
18
19
20
21
22
26
27
28