Fm Display Modes - Logik L44DAB10 Instruction Manual

FM Display Modes

Every time you press the INFO button, the display will cycle through the following display
modes: Programme Type, Signal Strength, Time/Date, Channel Frequency, Audio Mode,
Radio Text.
Programme Type
This describes the "Style" or "genre" of
music that is being broadcast e.g. "Rock" or
"Classical".
Signal Strength
The slide bar indicates how strong the
signal is, the stronger the signal, the longer
the bar will be.
Time/Date
The broadcaster (Radio station) provides
clock and date information automatically
so there's no need to manually set this
information. In the unlikely event that the
broadcaster does not transmit any clock
information; the display will show <Time/
Date>.
Channel Frequency
This shows the frequency of the current
station e.g. 89.80MHz.
Audio Mode
When in FM mode, the display will show
if the station being received is in mono
or stereo. The receiver will automatically
switch between Stereo and Mono mode.
You can however override this function,
so that you can manually switch between
Stereo and Mono mode, which is helpful if
you're listening to a poor FM signal.
To switch between mono and stereo, press the ENTER button once,
you will see on the display "Auto" or "Mono". To toggle between each
mode just press the ENTER button again.
Radio Text
As with DAB, the broadcaster can include
a scrolling text that displays information
about the current program. If Radio text
information is not available, then the
display with show <Radio Text>.
Programme Type
Signal Strength
Time/Date
Channel Frequency
Audio Mode
Radio Text
13