Inspection And Disassembly - Suzuki FD 110 XCS Service Manual

• Remove the brake cam lever bolt/nut 1.
• Remove the brake cam lever, brake lining wear indicator,
washer, O-ring and brake cam. (See page 5-27.)

INSPECTION AND DISASSEMBLY.

WHEEL BEARING ................................. Refer to page 5-6.
AXLE SHAFT ......................................... Refer to page 5-7.
WHEEL .................................................. Refer to page 5-7.
SPOKE NIPPLE ..................................... Refer to page 5-7.
BRAKE DRUM ....................................... Refer to page 5-7.
REAR SPROCKET DRUM BEARING ... Refer to page 5-6
• The inspection of the rear sprocket drum bearing in the same
manner of the wheel bearing.
REAR SPROCKET DAMPER
Inspect the cushion for wear and damage.
REAR SPROCKET
Inspect the sprocket teeth for wear. If they are worn as shown,
replace the sprockets and drive chain as a set.
CHASSIS
EXCESSIVE WEAR
NORMAL WEAR
5-32