System Configuration; Hardware Configuration - Denso BHT-805B User Manual

BHT-805B

1.1 System Configuration

This section describes the hardware required for the barcode data collection system used by the BHT and the BHT
software.

1.1.1 Hardware Configuration

In addition to the BHT, the following hardware and software are required for the barcode data collection
system used by the BHT.
Please note that certain components of the required hardware will differ depending on the type of
communication used.
• Host computer
• CU-800 Series (option): Communication unit
• Software: BHT-BASIC 4.0 Development Pack (Option) and BHT-BASIC 4.0 Transfer Utility (Option)
● : Required for system configuration
Host computer
IrDA
communication
2
BHT
IrDA
communication
CU (option)
BHT
● ●
Host computer
Wireless LAN
CU
access point
● —
BHT-BASIC 4.0
Development Pack
(Option)
BHT-BASIC 4.0
Transfer Utility
(Option)
Software Ref. Page
● Page 32