Stopwatch Mode; Stopwatch Enter Mode - Kustom Signals Pro-Lite Reference Manual

Stopwatch Mode

The stopwatch mode of the Pro-Lite is used to calculate
average speed based on the elapsed time taken by a vehicle
to travel a predetermined distance. To use the stopwatch
mode, press MENU and use the arrows to move to the
STPW selection. Press ENTER to access the stopwatch
Menu.
There are three methods that can be used in this mode-
1) use a pre-measured distance, 2) measure a range
followed by a second range and use the difference,
3) measure a range and use your location as the second
point. The initial stopwatch Menu screen appears as:
Stopwatch
ENTER

Stopwatch Enter Mode

The ENTER selection is used to enter the unit of
measure to be used in the stopwatch mode (Option 1).
The ENTER screen is shown below:
Stopwatch
FEET
Use either of the arrows to choose the unit of measure
to be used in the stopwatch mode. Either selection
displays a distance entry screen as follows:
Stopwatch
FEET
Pro-Lite Operator's Manual
1320
Page 30