Brightness - Kustom Signals Pro-Lite Reference Manual

The audible alert volume can be adjusted in the same
manner as the HUD brightness. The screen appears as
below:
There are six (6) LCD blocks corresponding to the
volume level of the audio annunciator. Use the arrows to
adjust the volume. The arrow pointing downward lowers
the volume; the arrow pointing upward increases the
volume. Each time an arrow is pressed adjusting the
volume, the audio briefly sounds, indicating the audio level
the user will hear at the selected level. Once the desired
level is achieved, press ENTER to confirm the selection.
NOTE: The Pro Lite will remember any change to this
feature. If you select a different volume level,
the next time you use the unit that level will
still be operational. To return to a different
volume, select that volume in the usual
manner. The Pro Lite will then remember that
volume.

Brightness

The brightness control should be adjusted to permit
comfortable viewing of the aiming reticle and optional HUD
displays for targeting purposes. To adjust, press ENTER at
the BRT/VOL Menu while HUD is selected.
Press MENU/ESC until the following screen is
displayed:
Pro-Lite Operator's Manual
Buzzer Volume
OFF < < < <
Menu
HUD BRIGHTNESS
Page 20
MAX