Kustom Signals Pro-Lite Reference Manual page 37

Using the arrows, adjust reading to the pre-measured
distance the target vehicle will be traveling during the
measurement. The minimum range that can be used is
300 feet. Press ENTER to confirm your selection. Once
ENTER is pushed, the Audio On/Off screen displays as
follows:
Stopwatch
Audio
This screen permits the user to enable or disable the
audio alert prompts during the stopwatch function. Use
either arrow to make the selection and press ENTER. The
"stopwatch ready" screen displays as follows:
Spd Dist
When the target passes the first reference point, press
and release the trigger once. When it passes the second
reference point, press the trigger a second time to stop the
timing function. The calculated average speed is shown
under "Speed" in the LCD display window and the time (in
tenths of a second) is shown under "Time" on the LCD.
Spd Dist
Speed will be displayed as ---- if the elapsed time is less
than that needed to be equivalent to a calculated speed of
200 mph or less.
Pro-Lite Operator's Manual
1320
60 1320
Page 31
ON
Time
Rdy
Time
15.0