Honeywell 6824 User Manual page 91

Enable Printing of Codes 128-159
Description:
Decimal:
Hex:
ASCII:
Disable Printing of Codes 128-159
Description:
Decimal:
Hex:
ASCII:
Expand Printable Code Area
Description:
Decimal:
Hex:
ASCII:
6824 Mobile Full Page Printer User Manual
Enables all codes (128 through 159) to be treated as printable characters, allowing the
use of these characters for user-defined characters. A user-defined set must be
selected, using Select User-Defined Character Set, before these characters can print.
Printing of these codes is disabled by default.
27 54
1B 36
ESC "6"
Disables the printing of codes 128 to 159. Printing of these codes is disabled by default.
27 55
1B 37
ESC "7"
Allows certain ASCII codes (00h to 1Fh) and codes (80h to 9Fh) to print. This allows the
use of these codes for user-defined characters. If n = 0, the function returns these two
ranges of characters to non-printable control codes. A user-defined character set must
be selected by Enable Printing of Codes 128-159 before these codes can print.
Set n as follows:
•
n =1 to allow printing of certain ASCII codes in the ranges 00h to 1Fh and 80h to 9Fh.
•
n = 0 to return these two ranges to non-printable control codes.
In both ranges, only the codes listed can be redefined as printable characters. Codes
within the range 00h to 1Fh not listed here print as standard control codes. Codes within
the range 80h to 9Fh not listed here are converted to control codes in the range 00h to
1Fh by subtracting 80h.
27 73 n
1B 49 n
ESC "l" n*
Appendix B – Printer Control Codes
81