Honeywell 6824 User Manual page 73

Perform n/216-inch Line Feed
Description:
Decimal:
Hex:
ASCII:
Perform n/216-inch Reverse Line Feed
Description:
Decimal:
Hex:
ASCII:
Perform Master Reset
Description:
Decimal:
Hex:
ASCII:
Set Print Position (absolute)
Description:
Decimal:
Hex:
ASCII:
6824 Mobile Full Page Printer User Manual
Advances the paper to n/216 of an inch. This does not affect subsequent line feeds.
Range of n is 0 to 255.
27 74 n
1B 4A n
ESC "J" n
Reverses the line feed by n/216 of an inch. This does not affect subsequent line feeds.
Range of n is 0 to 255.
27 106 n
1B 6A n
ESC "j" n
Initializes the printer and restores factory default settings.
27 64
1B 40
ESC "@"
Moves the printhead to an absolute horizontal position on the paper. The distance is
specified in dots from the left margin to the new print position (at which subsequent
characters are printed). The distance in dots is defined as:
number of dots = n1 + (n2 * 256)
Each dot represents 1/60 of an inch.
Maximum position is 480. The previous contents of the current print buffer are printed.
If the position specified moves the printhead outside the current margins, the command
is ignored and the previous setting remains in effect. This command is also ignored in
right, center, and full justification modes.
27 36 n1 n2
1B 24 n1 n2
ESC "$" n1 n2
Appendix B – Printer Control Codes
63