About The Page Layout - Honeywell 6824 User Manual

Appendix A – Specifications and Command Lists

About the Page Layout

54
The following illustration shows the printable area of the lower section of a page
of fanfold paper and the upper section of the next page. The Assured Print Area
is the best area to use for printing.
Area 2
1.9 cm (0.75 in)
or more
Paper End
detection position
Perforation
You should leave a 1 inch margin at both the top and the bottom of the page.
This provides for a margin of six lines at 1/6 inch line spacing. Even though
printing in Area 1 (before or after the perforation) may be possible, you should
keep in mind that paper feed precision is reliable only within the Assured Print
Area.
•
The top and bottom margins are represented by Area 1. The top margin is
defined as the distance between the top edge of the paper and the first row
of printed characters. The bottom margin is defined as the distance between
the last row of printed characters and the bottom edge of the paper.
•
For reliable printing, consider there are 55 lines available for reliable printing.
Paper feed precision is most reliable with top and bottom margins of
approximately one inch.
•
The left and right margins are represented by Area 2. For reliable printing,
use a margin of at least 0.75 in for the left and right margins.
•
The Paper End Detection line indicates the point where the Paper Out sensor
detects the bottom edge of the paper.
•
Area 3 represents the distance between the Paper End Detection position
and the bottom edge of the page.
Page width
Assured print area
Max. 20.32 cm (8.0 in)
Assured print area – Max. 55 lines
@.159-cm (1/16-in) line spacing
Area 1 – 2.5 cm (1 in)
Area 1 – 2.5 cm (1 in)
6824 Mobile Full Page Printer User Manual
Area 2
1.9 cm (0.75 in)
or more
Area 3
4.66 cm (1.83 in)
11 lines