Installation Of Ink Ribbon; Before Operation - Mitsubishi Electric CP9000DW Operation Manual

BEFORE OPERATION

INSTALLATION OF INK RIBBON

2 2 2 2 2
INSTALLING THE INK RIBBON
Before installing the ink cassette into this unit, load the ink ribbon in the ink cassette.
• Place the ink cassette on a flat surface, when loading the ink ribbon.
• Place the ink cassette on a flat surface, when loading the ink ribbon.
• Make sure that the shafts of the ink ribbon fit into the ink cassette firmly.
1 1 1 1 1
Load the ink ribbon in the ink cassette as shown below.
• Make sure to set load it in the correct position.
2
1
3
4
Ink ribbon
Gear
2 2 2 2 2
INSTALLING THE INK CASSETTE
1 1 1 1 1
Install the ink cassette with the ink ribbon into the compartment
of the unit.
Make sure to set the green roller with ink ribbon rolled to the front. Then set the ink
ribbon and cassette into the position of the unit as marked in the figure.
Make sure to set the green ink ribbon roller to the ditches firmly.
Turn the ivory roller to eliminate any slack.
14
NOTE
1
2
4
3
Handle
Ink cassette
1
4
Arrows
2
3
Guide