Setting Of Dip Switches - Mitsubishi Electric CP9000DW Operation Manual

SETTING DIP SWITCHES
2 2 2 2 2
All the switches are set to OFF at the time of shipment from the factory.
Turn off the power before changing the DIP switch settings.
Switch No. Setting Function
1 OFF Auto feed & cut mode
When the door is closed after the print paper or a ink cassette is installed with this unit powered on,
this unit automatically carries out paper feed & cut operation.
ON Manual feed & cut mode
2 OFF Not used. (Set this switch to OFF.)
ON
3 OFF Not used. (Set this switch to OFF.)
ON
4 OFF Not used. (Set this switch to OFF.)
ON
5 OFF Not used. (Set this switch to OFF.)
ON
6 OFF Not used. (Set this switch to OFF.)
ON
7 OFF Not used. (Set this switch to OFF.)
ON
8 OFF Not used. (Set this switch to OFF.)
ON

SETTING OF DIP SWITCHES

OFF ON
11