Mitsubishi Electric CP9000DW Operation Manual page 4

WARNING:
In the USA or Canada, use the AC power cord according to the
recommendations as below, in order to comply with UL60950
and CAN/CSA C22.2 No. 60950-00.
Case 1. Connect to the 120V receptacle of the room or the host
equipment.
The AC power cord should be UL or CSA approved
and consist of type SJT or SVT, size 16 or 18AWG,
length 2.5m or shorter cord with IEC320/C13 type,
125V 10A or higher rating connector and NEMA 5-15
type, 125V 10A or higher rating plug.
Case 2. Connect to the 230V receptacle of the room or the host
equipment.
The AC power cord should be UL or CSA approved
and consist of type SJT or SVT, size 16 or 18AWG,
length 2.5m or shorter cord with IEC320/C13 type,
250V 10A or higher rating connector and NEMA 6-15
type, 250V 10A or higher rating plug.
WARNING:
In Europe, use the AC power cord according to the recommen-
dations as below, in order to comply with EN60950.
Connect to the 230V receptacle of the room or the host equip-
ment.
The AC power cord should be VDE approved and consist of
2
core size 1mm or bigger, length 2.5m or shorter cord with
IEC320/C13 type, 250V 10A or higher rating connector and
CEE(7)VII type or IEC 320-2.2/E type, 250V 10A or higher
rating plug.