Overcoming Paper Jams - Mitsubishi Electric CP9000DW Operation Manual

1 1 1 1 1
Press the DOOR OPEN button to open the door.
Make sure that the power is turned on before opening the door.
If the door does not open, turn off the power and turn it on again.
Then press the DOOR OPEN button again.
2 2 2 2 2
Remove the ink cassette.
Push down the ink cassette as shown by the arrow
3 3 3 3 3
Take out the print paper.
4 4 4 4 4
Cut off the defective part of the print paper with scissors.
Make sure to cut off the printed part of the print paper. Failure to do this may result in the
ink ribbon sticking to the print paper and being torn.
5 5 5 5 5
Install the print paper and the ink cassette with the ink ribbon. (Refer
to pages 12-15.)
6 6 6 6 6
Press the FEED & CUT button.
The setting of this unit is initialized.

OVERCOMING PAPER JAMS

1
and pull it out.
NOTE
2
1
DOOR OPEN CANCEL FEED&CUT
19