CONNECTIONS
CONNECTION WITH USB DATA SIGNAL EQUIPMENT
CONNECTING TO PERSONAL COMPUTER (EXAMPLE)
2
2
2
2
2
1 1 1 1 1
Press the POWER button to turn on the power.
2 2 2 2 2
Press the DOOR OPEN button to open the door.
3 3 3 3 3
Set the input select switch inside this unit to USB.
Close the door.
4 4 4 4 4
Press the POWER button to turn off the power.
5 5 5 5 5
Connect the unit and the personal computer with a USB cable.
Connect this unit to a personal computer as shown below.
Make sure to turn off the main power of the unit and other equipment before
connection.
Personal computer
6 6 6 6 6
After verifying the connection, press the POWER button to
turn on this unit.
7 7 7 7 7
Turn on the power of the personal computer.
10
To USB port
To USB port
Input select switch
Digital color printer