Audio Outputs - Creative Sound Blaster X-Fi User Manual

Connectivity
Sound Blaster X-Fi audio card
Audio Inputs
One analog input via stereo jack on rear bracket (selectable from line-level
analog line input or mono microphone analog input)
AUX_IN line-level analog input via 4-pin Molex connector on card
Audio Outputs
Three line-level analog outputs via 4-pole 3.50 mm (1/8-inch) jacks on rear
bracket: Front Left, Front Right, Rear Left, Rear Right, Side Right, Center,
Subwoofer and Side Left channels
Stereo headphone (32-ohm load) support on Line Out 1 jack
For SB046X and SB055X series: Digital Out via 3.50 mm (1/8-inch) jack on
rear bracket (sharing with the Line In/Microphone In jack)
For SB073X series: Optical Out via 3.50 mm (1/8-inch) jack on rear bracket
(sharing with the Line In/Microphone In jack)
Interfaces
4-pin power supply header for connection to the system power supply unit,
supplying power to the X-Fi I/O Console*
2 x 20 pin AD_EXT header for connection to the X-Fi I/O Drive*
2 x 5 pin Front Panel Header for connections with Intel HD Front Panel Audio
standard header (For SB073X series only)
One AD_Link (26 pin) connector for linking to the X-Fi I/O Console*
Digital I/O Module*
Audio Inputs
Optical jack for optical SPDIF input
Coaxial jack for coaxial SPDIF input
Audio Outputs