Audio Outputs; Sb1394 Interfaces; Interfaces - Creative Sound Blaster Audigy 2 User Manual

Audio Outputs

SB1394 Interfaces

The 6-pin SB1394
connector/port has a 3 watt
maximum power output.
Connect only one high power
usage device such as the
IEEE 1394 hard disk and CD-
RW drive to this port unless
it is self-powered.

Interfaces

❑ CD_SPDIF digital input via 2-pin Molex connector on card
❑ DIGITAL OUT via 4-pole 3.5 mm minijack on rear bracket
❑ Three line-level analog outputs via 3.5 mm minijacks on rear bracket: front, rear,
and rear center/center/subwoofer Line-Outs 1, 2 and 3
❑ Stereo headphone (32-ohm load) support on Front Line-Out
❑ One 2 x 5 pin Internal SB1394 connector on card
❑ One 6-pin SB1394 port on rear bracket
❑ AD_EXT 2 x 20 pin header for connection to Audigy 2 Drive
❑ JOYSTICK 2 x 8 pin header* for connection to the Joystick/MIDI connector
(optional attachment)
General Specifications A-4