Creative Sound Blaster X-Fi User Manual page 41

Jack,
Connector or
Cable
1. Rear Left jack
2. Rear Right jack
3. Side Right jack
4. Line Out 2 jack
5.
3.50 mm (1/8-inch) surround-to-RCA cable (available separately)
Connects the Sound Blaster X-Fi audio card and home theater receiver.
Connect this jack to the Line Out 2 jack on your Sound Blaster X-Fi audio card, using a 3.50
mm (1/8-inch) 4-pole-to-RCA cable (available separately).
Connect this jack to the Line Out 2 jack on your Sound Blaster X-Fi audio card, using a 3.50
mm (1/8-inch) 4-pole-to-RCA cable (available separately).
Connect this jack to the Line Out 2 jack on your Sound Blaster X-Fi audio card, using a 3.50
mm (1/8-inch) 4-pole-to-RCA cable (available separately).
Connect the following jacks on a multichannel home theater receiver to this jack using a 3.50
mm (1/8-inch) 4-pole-to-RCA cable (available separately):
On 4.1 and 5.1 systems: Rear Left and Rear Right
On 7.1 systems: Rear Left, Rear Right and Side Right
Description