Inputs And Outputs On Rear Panel - Creative Sound Blaster X-Fi User Manual

Optical jack for optical SPDIF output
Coaxial jack for coaxial SPDIF output
Sound Blaster X-Fi I/O Drive*
Inputs and outputs on front panel
Two RCA jacks for coaxial SPDIF input and output
Headphone output and volume control with auto detection via 6.35 mm (1/4-
inch) stereo jack
Shared line-level analog Line/Microphone input via 6.35 mm (1/4-inch) stereo
jack. Shared input selectable via dial with gain control for microphone.
Two mini MIDI female connectors for MIDI input and output
Two RCA jacks for Auxiliary input
Two optical connectors for optical SPDIF input and output
Infrared receiver for receiving infrared signals from the remote control.
Transmission range within four meters (13 feet) with 15-degree deviation from
the center axis.
Interfaces
4-pin power supply header for connection to system power supply unit
2 x 20 pin AD_EXT header for connection to Sound Blaster X-Fi audio card
Sound Blaster X-Fi I/O Console*
Inputs and outputs on front panel
Headphone output and volume control with auto detection via 6.35 mm
(1/4-inch) stereo jack
Shared line-level analog Line/Hi-Z input via 6.35 mm (1/4-inch) stereo jack.
Shared input selectable via dial with gain control for Hi-Z input.
Shared line-level analog Line/Microphone input via 6.35 mm (1/4-inch) stereo
jack. Shared input selectable via dial with gain control for microphone.
Infrared receiver for receiving infrared signals from the remote control.
Transmission range within four meters (13 feet) with 15-degree deviation from
the center axis.
Inputs and outputs on rear panel