Creative Sound Blaster X-Fi User Manual page 42

Jack,
Connector or
Cable
1. Side Left jack
2. Center jack
3. Subwoofer jack
4. Line Out 3 jack
5.
3.50 mm (1/8-inch) surround-to-RCA cable (available separately)
Connects the Sound Blaster X-Fi audio card and home theater receiver.
Notes
Actual products may differ slightly from those pictured.
Use the Sound Blaster 7.1 Multichannel cable (available separately), which is
a 3 x 3.50 mm (1/8 inch) jack-to-8 x RCA adapter cable, to connect the Sound
Blaster X-Fi audio card to your 7.1 channel home theater receiver. Visit
www.creative.com for more information.
Connect this jack to the Line Out 3 jack on your Sound Blaster X-Fi audio card, using a 3.50
mm (1/8-inch) 4-pole-to-RCA cable (available separately).
Connect this jack to the Line Out 3 jack on your Sound Blaster X-Fi audio card, using a 3.50
mm (1/8-inch) 4-pole-to-RCA cable (available separately).
Connect this jack to the Line Out 3 jack on your Sound Blaster X-Fi audio card, using a 3.50
mm (1/8-inch) 4-pole-to-RCA cable (available separately).
Connect the following jacks on a multichannel home theater receiver to this jack using a 3.50
mm (1/8-inch) 4-pole-to-RCA cable (available separately):
On 5.1 systems: Front Center and Subwoofer
On 7.1 systems: Front Center, Subwoofer and Side Left.
Description