Creative Sound Blaster X-Fi User Manual page 40

Connecting a multichannel home theater receiver
If you have a multichannel home theater receiver, you can connect it directly to
the Sound Blaster X-Fi audio card's Line Out 1, Line Out 2 and Line Out 3 jacks
as shown below. For more information on multichannel home theater receiver
speaker connections, consult the User's Guide of your home theater receiver.
For more information on the appropriate jacks to use, see Stereo and 4-Pole Jack
Diagrams.
Jack, Connector or
Cable
1. Front Left jack
2. Front Right jack
3.50 mm (1/8-inch) stereo-to-
3. RCA cable (available
separately)
4. Line Out 1 jack
Connect this jack to the Line Out 1 jack on your Sound Blaster X-Fi audio card, using
a 3.50 mm (1/8-inch) stereo-to-RCA cable (available separately).
Connect this jack to the Line Out 1 jack on your Sound Blaster X-Fi audio card, using
a 3.50 mm (1/8-inch) stereo-to-RCA cable (available separately).
Connects the Sound Blaster X-Fi audio card and home theater receiver.
Connect this jack to the Front Left and Front Right jacks on a multichannel home
theater receiver, using a 3.50 mm (1/8-inch) stereo-to-RCA cable (available
separately).
Description