Accessories And Replacement Parts - Vega VEGABAR 82 Operating Instructions Manual

3 Product description
PLICSCOM
VEGACONNECT
Slave sensors
VEGADIS 81
VEGADIS adapter
Overvoltage protection
Protective cover
16
3.4

Accessories and replacement parts

The display and adjustment module PLICSCOM is used for measured
value indication, adjustment and diagnosis. It can be inserted into the
sensor or the external display and adjustment unit and removed at
any time.
The integrated Bluetooth module (optional) enables wireless adjust-
ment via standard adjustment devices:
•
Smartphone/tablet (iOS or Android operating system)
•
PC/notebook with Bluetooth USB adapter (Windows operating
system)
You can find further information in the operating instructions "Display
and adjustment module PLICSCOM" (Document-ID 36433).
The interface adapter VEGACONNECT enables the connection of
communication-capable instruments to the USB interface of a PC. For
parameter adjustment of these instruments, the adjustment software
PACTware with VEGA-DTM is required.
You can find further information in the operating instructions "Interface
adapter VEGACONNECT" (Document-ID 32628).
Slave sensors of VEGABAR series 80 enable in conjunction with
VEGABAR 82 an electronic differential pressure measurement.
You can find further information in the operating instructions of the
respective slave sensor.
The VEGADIS 81 is an external display and adjustment unit for VEGA
plics sensors.
®
For sensors with double chamber housing the interface adapter
"VEGADIS adapter" is also required for VEGADIS 81.
You can find further information in the operating instructions
"VEGADIS 81" (Document-ID 43814).
The VEGADIS adapter is an accessory part for sensors with double
chamber housings. It enables the connection of VEGADIS 81 to the
sensor housing via an M12 x 1 plug.
You can find further information in the supplementary instructions
"VEGADIS adapter" (Document-ID 45250).
The overvoltage arrester B81-35 is used in the single or double
chamber housing instead of the connection terminals. It reduces any
voltage surges that may reach the signal cables to a harmless level.
You can find further information in the supplementary instructions
"Overvoltage arrester B81-35" (Document-ID 50708).
The protective cover protects the sensor housing against soiling and
intense heat from solar radiation.
Bluetooth function with VEGADIS 82 can only be used at a later date.
1)
1)
VEGABAR 82 • Foundation Fieldbus