Dc/Ac Current Measurements - Aktakom ACM-2348 Operating Instruction

4.
Select the range to Current AC or DC, and check the
current reading.
5.
Select appropriate Watt range 40KW(0-250V,0-400A)
or 240KW (0-600V,0-400A).
6.
Read the value shown on LCD in KW (AC+DC).
DC/AC Current
Measurements
WARNING: Ensure that
the test leads are
disconnected from the
meter before making
current
clamp measurements.
Select AC or DC with
the MODE button.
DC/AC Voltage
Measurements
1. Insert the black test lead into the negative COM terminal
and the
red test lead into the positive V terminal.
2. Set the function switch to the V position.
3. Select AC or DC with the MODE button.
4. Connect the test leads in parallel to the circuit under test.
5. Read the voltage measurement on the LCD display.
No
.
C AP
.
n
A
D C +
A C
8
Yes
.
C AP
.
n
A
D C +
A C