Aktakom ACM-2348 Operating Instruction page 3

or death. Read and understand this user manual before
operating the meter.
Always remove the test leads before replacing the battery.
Inspect the condition of the test leads and the meter itself for
any damage before operating the meter. Repair or replace
any damage before use.
Use great care when making measurements if the voltages
are greater than 25VAC rms or 35VDC. These voltages are
considered a shock hazard.
Remove the battery if the meter is to be stored for long
periods.
Always discharge capacitors and remove power from the
device under test before performing Diode, Resistance or
Continuity tests.
x Voltage checks on electrical outlets can be difficult and
misleading because of the uncertainty of connection to the
recessed electrical contacts. Other means should be used
to ensure that the terminals are not "live".
x If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may
be impaired.
Function
DC+AC Watt
A AC,A DC
V DC, V AC
Resistance, Diode, Continuity,
Frequency, Duty Cycle, Test
Input Limits
Maximum Input
240KW
1000A
600V DC/AC
250V DC/AC
2