Steelcase Ology User Manual page 4

HEIGHT ADJUSTMENT CONTROLLERS
Active Touch Controller
OPERATING THE CONTROLLER
The desk adjusts via the active touch controller.
•
Lift or press
up
desk height. The display will show the current height of the desk.
•
To switch to a stored height in memory, tap twice on the
controller in quick succession in the direction you want the desk
to move. The desk will move up or down until it has reached the
stored height.
•
Or when lifting or pressing down on the controller, the desk will
pause at the stored preset. Release the controller to stop at the
stored height.
Note: To bypass stored heights, continue to lift or press down.
The desk will pause briefly before continuing until the
minimum or maximum height is reached.
Note: To stop the desk from traveling to the stored height, lift or
press down on the controller.
WARNING This controller allows the desk to move to a saved
height without continuously touching the controller. Be sure no
people or objects are in the path of the desk. Never allow children
to operate this desk as injury or property damage could occur.
STORE HEIGHT INTO MEMORY
To set into memory the desired height for either seated or standing
work, use the two memory position buttons.
•
Lift up or press
desk height.
•
Press and hold the memory position button,
second until the number 1 or 2 flashes and the light guide fills.
•
To save an additional height, repeat this sequence using the
1 or 2 button.
•
To clear all stored memory positions, press and hold the
1 and 2 buttons simultaneously, for one second, until the
display flashes "PRESET CLEAR" and the light guide fills.
on the controller to reached the desired
down
down on the controller to reach the desired
1 or 2, for one