Hub Features - Compex SGX3224 Quick Install Manual

§
Buffer RAM size of 12Mbytes for SGX3224 PLUS only.
§
4Mbytes buffer RAM for Gigabit Uplink factory installed option
(SGX3224 PLUS only).
§
Support up to 12KMAC addresses.
§
IEEE802.3x flow control for full duplex operation.
§
Back pressure flow control for half duplex operation.
§
SNMP manageable.
§
MIB supported: MIB II, Bridge MIB, Proprietary MIB, RMON
MIBS.
§
RMON capability: four RMON groups supported – Ethernet
Statistics, Alarm, History and Event group.
§
Port VLAN function supported.
§
Change of transmission mode supported (10Base-T half duplex,
10Base-T full duplex, 100Base-TX half duplex, 100Base-TX full
duplex or N-way Auto-negotiation) through any management
interface.

Hub Features

(see diagrams on inner cover)
♦
1 POWER LED:
♦
2 100 LEDs
♦
3 FD LED
♦
4 ACT/LINK
LEDs
♦
♦
5 COL
♦
6 24 RJ-45 Ports
♦
7 Uplink Button
♦
('P1')
2 Compex 24 - Port All 10/100 Management Switch
(SGX3224, SGX3224 PLUS)
LED ON indicates hub is receiving power.
Link Status for 100Mbps connection for
Ports 'P1' to 'P24'. LIGHTS UP when
connected to100Mbps segment.
Full Duplex LED: LIGHTS UP when
particular port is running at Full Duplex
mode.
Activity LED and Link Status for Ports 'P1'
to 'P24'. BLINKS indicate network activity
is present.
STEADY LIGHT indicates a good cable
connection to the SGX3224's port.
Indicate collision at the network segment of
the respective port.
RJ-45, 100Base-TX/10Base-T ports; Auto-
negotiation.
Configured as 24 UTP Ports or 23 UTP
ports plus 1 Uplink Port.
Normal mode when button is pushed IN.
Uplink mode when button is released OUT.
English