The Second Flight Configuration - Hubsan H122D Quick Start Manual

The second flight configuration: Aircraft + HS001+
HT015 Transmitter+HV002 Video glasses
Step 1
Binding the aircraft and transmitter
1. Pull and hold the throttle to its lowest position. Hold down the Photo key
and power the transmitter on; allow the transmitter to enter binding mode.
All illustrations are shown in Mode 2 (American hand)
2. Power the HS001 on by pushing the power switch up. Long press the
display's binding button (shown below) to allow the HS001 to enter
binding mode. The display will beep three times.