Broaster.com Manual #15459 5/02 Rev: - Broaster 2400 Operation Manual

SMART TOUCH FAMILIARIZATION
ON
OFF
1. Power Switch: This switch has two
positions: ON or OFF.
2. Hi-Limit Control: Prevents oil tempera-
ture from exceeding 475°F. When this
control trips, the power to the unit will
be shut down. Turn unit OFF and DO
NOT attempt to operate until it has
been serviced by an authorized
Broaster Company representative.
It is possible for this con-
trol to trip during ship-
ment. If it does, fully depress red reset
button. If control "clicks" it was tripped.
If not, it is correctly reset.
3. Touch Control Screen: Touching this
screen controls the many options of
the fryer.
On initial power up you may be asked to
enter the current date and time, and verify
the Serial Number. Or the screen will have
the word CAUTION flashing on the screen.
If the date and time entry screen appears
press the box after "Month" and a keypad
will appear. Enter the number of the month
and press the enter key. Repeat this action
for the Day, Year, Hours, Minutes, Seconds,
AM and PM boxes. When finished press the
green OK button in the bottom right corner
of the screen. The next display will ask you
if this date should be used to establish the
warranty start date. Press the green OK
button.
You will then see a display asking you to
verify the serial number of your fryer. Enter
the serial number using the keyboard and
press enter.
Note: The date/time display and the serial
number display will not appear again when
the power switch is turned off and back on.
If the CAUTION screen appears it is there to
remind you to check the oil level before the
heating elements or burner are activated. If
the oil is at the proper level, press the green
OK button in the bottom right corner of the
screen.
Along the top of the screen are four tabs
(Cook, Filter, Setup and Help) to help you
setup and use your fryer.
6–5

broaster.com Manual #15459 5/02 Rev: 6/16

HIGH
LIMIT
RESET