Storage - wtw Cond 3210 Operating Manual

Operation
Editing the data storage
Settings
Display presentation
of a dataset
Quitting the display
40
contents.
The storage is edited in the menu, Storage & config/ Data storage. To
open the Storage & config menu, press the <F1
measured value display. Open the manual storage directly with the
<RCL> key.
Menu item
Data storage /
Manual data storage /
Display
Data storage /
Manual data storage /
Erase
Manual data storage
30.10.2008 11:24:16 ID number: 1
ӕ 1415 µS/cm
25.1 °C AR +++
C = 0.835 1/cm, Tref 25, nLF
22.09.2008
Back
08:00
To quit the display of stored measurement datasets, you have the
following options:
 Switch directly to the measured value display with <M>.
 Quit the display and move to the next higher menu level with <F1>/
[Back].
Setting/ Description
function
- Displays all measurement
datasets page by page.
Further options:
 Scroll through the
 Quit the display with
- Erases the entire manual
measurement data

storage.

Note:
All calibration data remains
stored when this action is
performed.
3 of 64
Cond 3210
_
>[Menu] key in the
datasets with <▲><▼>.
<F1>/[Back].
ba75794e04 04/2012