Table of Contents
Advertisement
42
DSR Installer/User Guide
Figure 3.15: Disconnect Dialog Box
4.
Click OK to disconnect the user and return to the User Status dialog box.
-or-
Click X or press Escape to exit the dialog box without disconnecting a user.
NOTE: If the User Status list has changed since it was last displayed, the mouse cursor will
turn into an hourglass as the list is automatically updated. No mouse or keyboard input will be
accepted until the list update is complete.
Resetting Your PS/2 Keyboard and Mouse
If your PS/2 keyboard or mouse locks up, you may be able to re-establish
operation of these peripherals by issuing a reset command. The reset
command sends a hot-plug sequence to the server which causes the mouse
and keyboard settings to be sent to the DSR1021 switch. With communication
re-established between the server and the DSR1021 switch, functionality is
restored to the user.
NOTE: This function is for Microsoft Windows-based computers only. Resetting the PS/2 on a
server running any other operating system may require that you reboot that server.
To reset the PS/2 mouse and keyboard values:
1.
If the OSCAR interface is not open, press Print Screen. The Main dialog
box will appear.
2.
Click Commands - Reset PS/2. A message box displays requesting that you
confi rm the reset. Click OK.
a.
A message appears indicating that the mouse and keyboard have
been reset.
Advertisement
Table of Contents
