Function Thread Away On/Off; Programming Securing Stitches (Smart Secure) - Bernina 590 Instructions Manual

Setup Program
> Touch the icon «Embroidery settings».
> Touch the icon «Select fabric thickness».
> Select fabric thickness.

Function thread away on/off

The thread end is pulled out of the fabric after being cut.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Thread away».
> Touch the switch using the touchscreen pen/finger to deactivate the function thread away.
> Touch the switch using the touchscreen pen/finger again to activate the function thread away.

Programming securing stitches (Smart Secure)

Embroidery motifs are programmed either with or without securing stitches. The machine recognizes when
no securing stitches are programmed and adds some.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Securing stitches on/off».
> Press the switch in the upper right section to deactivate the securing stitches at the start.
> Press the switch again to activate the securing stitches at the start.
62
– If the embroidery motif has programmed securing stitches, they will be embroidered.
– If the embroidery motif doesn't have any programmed securing stitches, none are embroidered.
– If the embroidery motif has programmed securing stitches, they will be embroidered.
– If the embroidery motif doesn't have any programmed securing stitches, the securing stitches are
added and will be embroidered.