Bernina 590 Instructions Manual page 47

Sewing preparation
> Guide the thread through the guides (6/7) above the foot.
> Switch the machine on.
> Press the semi-automatic threader lever (8) slightly down, keep pressed and pull the thread to the left
> Guide the thread around the gray threader hook from the left to the right (11).
> Press the threader lever down as far as it will go (10) and then pull the thread from the left to the right
> Pull the thread over the thread cutter (13) from the back and cut.
> Release the lever to thread.
48
6
7
beneath the gray threader hook (9).
8
9
(11) through the threader slot (12) until it hooks into the small wire hook.
10
11 12
13