Symbols In This Manual - Ryobi RHT2660R Original Instructions Manual

Hide thumbs Also See for RHT2660R:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 3
Press the trigger lock and the throttle
trigger.
Conforms to all regulatory standards in
the country in the EU where the product
is purchased.
EurAsian Conformity Mark
Ukrainian mark of conformity
The guaranteed sound power level is
104
104 dB.
1
1
4
7
2
NOTE: Lay the product on the ground. Ensure that no
objects and other obstructions in the vicinity that could
come in contact with the blades.
To start a cold engine:
1. Press the primer bulb 10 times.
NOTE: After the 7th press, the fuel should be visible
in the primer bulb. If not, continue pressing until the
fuel is visible.
2. Set the choke lever to
3. Hold and squeeze the rotating handle, throttle trigger,
and throttle trigger lock firmly with your left hand. Pull
the starter grip until the engine attempts to start. Do
not pull the starter grip more than 4 times.
4. Set the choke lever to
5. Hold and squeeze the rotating handle, throttle trigger,
and throttle trigger lock firmly with your left hand. Pull
the starter grip until the engine starts. Do not pull the
starter grip more than 6 times.
6. Allow the engine to run for 10 seconds
7. Set the choke lever to
To start a warm engine:
1. Press the primer blub 10 times.
NOTE: After the 7th press, the fuel should be visible
in the primer bulb. If not, continue pressing until the
fuel is visible.
2. Set the choke lever to
3. Hold and squeeze the rotating handle, throttle trigger,
and throttle trigger lock firmly with your left hand. Pull
the starter grip until the engine starts. Do not pull the
starter grip more than 6 times.
To stop the engine:
Press the I/O switch to the OFF position (O).
2
3
5
3
6
position.
position.
position.
position.

SYMBOLS IN THIS MANUAL

Parts or accessories sold separately
Note
Warning
Do not smoke when mixing fuel or when
fi lling the fuel tank.
Risk of fire
To stop the product, press and hold the
I/O switch to the "O" position.
The following signal words and meanings are intended to
explain the levels of risk associated with the product.
DANGER
Indicates an imminently hazardous situation, which, if
not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
CAUTION
Without safety alert symbol
Indicates a situation that may result in property damage.
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
English |
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents