Related Manuals for Ryobi RHT2660RN
Summary of Contents for Ryobi RHT2660RN
- Page 1 RHT2660RN PETROL HEDGE TRIMMER ORIGINAL INSTRUCTIONS Important! It is essential you read the instructions in this manual before starting and operating this machine.
-
Page 2: Symbols Explanation
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOLS EXPLANATION Precautions that involve your safety. To reduce the risk of injury, user must read and understand operator’s manual before using this product. - Page 3 Wear non-slip, heavy duty gloves. Guaranteed sound pressure level and sound power level. Press the On/Off switch to the “I” position before starting the trimmer. Do not press the trigger lock and the throttle trigger Press the primer bulb 10 times. Set the choke lever to “Full”...
-
Page 4: General Safety Rules
SERVICE Servicing requires extreme care knowledge WARNING and should be performed only by a qualified service Read and understand all instructions. Failure to follow technician. For service we suggest you return the product all instructions listed below may result in electric shock, to your nearest authorized service centre for repair. -
Page 5: Specific Safety Rules
■ Exercise caution to avoid slipping or falling. ■ Never use in an explosive atmosphere. ■ Always wear safety glasses with side shields. ■ Do not operate while smoking or near an open flame. Everyday eyeglasses have only impact-resistant ■ Do not operate at night, at times of heavy fog, or at any lenses;... -
Page 6: Product Specifications
■ Keep the engine away from flammables and other hazardous materials. ■ When servicing, use only identical Ryobi replacement parts. Use of any other parts may create a hazard or ■ Keep away from hot parts. The silencer and other cause product damage. -
Page 7: Packing List
3. Front handle Fuel Consumption 0.45 L/h 4. Rotating handle knob accordance with ISO 8893) 5. Fuel cap at Max Engine Performance 6. Primer bulb Specific Fuel Consumption 0.68 L/kW.h 7. Rotating handle (in accordance with ISO 8. Trigger lock 8893) Engine 9. -
Page 8: Operation
■ Mix in small quantities. Do not mix quantities larger WARNING than usable in a 30 day period. Synthetic 2-stroke To prevent accidental starting that could cause serious lubricant containing a fuel stabilizer is recommended. personal injury, always disconnect the engine spark plug wire from the spark plug when assembling parts. -
Page 9: To Stop The Engine
CUTTING TIPS starting the trimmer. 3. Press the primer bulb 10 times. 4. Set the choke lever to “Full” choke position. WARNING 5. Pull the starter grip until the engine attempts to start. Always keep both hands on the hedge trimmer handles. 6. -
Page 10: Operating The Hedge Trimmer
to possibly reduce the effects of vibration: WARNING a. Keep your body warm in cold weather. When operating Always wear safety goggles or safety glasses with side the unit wear gloves to keep the hands and wrists shields during product operation. If operation is dusty, warm. - Page 11 ■ Stop the engine and disconnect the spark plug wire. WARNING ■ Lay the hedge trimmer on a flat surface. Apply light Be careful not to cross-thread the spark plug. Cross- weight machine lubricant along the edge of the top threading will seriously damage the product.
-
Page 12: Troubleshooting
TROUBLESHOOTING If these solutions do not solve the problem, contact your authorised service dealer. PROBLEM POSSIBLE CAUSE SOLUTION Engine will not start. No fuel. Push primer bulb until bulb is full of fuel. If bulb does not fill, primary fuel delivery system is blocked. - Page 13 Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 18-26 Amelia Earhart Avenue Mangere, Auckland 2022, New Zealand 960639018-02...
Need help?
Do you have a question about the RHT2660RN and is the answer not in the manual?
Questions and answers
Where is the sparkle plug in Ryobi RH2660RN petrol hedge trimmer
The exact location of the spark plug in the Ryobi RHT2660RN petrol hedge trimmer is not specified in the provided information. However, spark plugs in petrol hedge trimmers are typically located on the engine cylinder head and can be accessed by removing the top or side cover. For this model, disconnecting the spark plug wire is mentioned in the cleaning instructions, which suggests it is accessible externally.
This answer is automatically generated