Kärcher NT 35/1 AP Te Service Manual page 22

9.2 Replace the mechanics of the AP filter
cleaner

Remove the screws from the filter cap.

Remove the filter cover.

Pull the pin out of the lever hinge.

Remove the lever.

Remove the individual mechanical parts.

Check the function of the diaphragm.

Reassemble the AP system
22
English 5.906-520.0 Rev. 00 (03/12)

Observe the alignment of the slide cap (arrow)
during installation.
9.3 Replace the AP actuation key

Press the locking tabs together with pliers and, at
the same time pull the key out of the housing to-
ward the top.
9.4 Electrical components of the appliance

Unscrew the screws of the hood.

Remove the hood.
1 Supply Cord
2 Appliance electronics
3 Power switch
4 Hinge pin
5 Connecting cable electrodes overflow protection
(blue)