2
Preface
Good service work requires extensive and practice-
oriented training as well as well-structured training
materials.
Hence we offer regular basic and advanced training
programmes covering the entire product range for all
service engineers.
In addition to this, we also prepare service manuals
for important appliances - these can be initially used
as instruction guides and later on as reference
guides.
Apart from this, we also regular information about
product enhancements and their servicing.
If you should require supplements, have corrections
or questions regarding this document, please ad-
dress these citing the following subject to:
international-service@de.kaercher.com
Subject:
Fall 111302
The responsible product specialist will take care of
your issue.
Copying and duplication of texts and diagrams as
well as third-party access to this information is
permitted only with the explicit permission of the
company:
Alfred Kärcher GmbH & Co. KG
P O Box 160
D -71349 Winnenden
www.kaercher.com
3
Safety instructions
3.1 Hazard levels
Danger
Immediate danger that can cause severe injury or
even death.
Warning
Possible hazardous situation that could lead to se-
vere injury or even death.
Caution
Possible hazardous situation that could lead to mild
injury to persons or damage to property.
Note
indicates useful tips and important information.
4
English 5.906-520.0 Rev. 00 (03/12)
4
Technical Features
4.1 General
Wet/dry vacuum cleaner to clean floors and walls
–
for commercial use at construction sites, industrial
sites and workshops.
Storage surface for tools on the suction head.
–
Container capacity: 25 - 75 l
–
Drain hose for liquids.
–
4.2 Filter and vacuum system
Closeable paper filter bag for dust-free disposal.
–
Suction hose connection (DN 40) with bayonet
–
system.
Tact² filter cleaning technology (Triggered Air
–
Draft Cleaning Technology). Switchable fully auto-
matic filter cleaning.
Electronic fill level monitoring (in wet vacuum
–
mode) switches the turbine off automatically when
the max. liquid fill level is reached.
4.3 Tools used
Screwdriver T20
–
Screwdriver T15
–
Flat pliers
–