Gree GVA24AL-K3NNC7A/I Service Manual page 85

Steps
10. Remove 4-way valve assy
Unsolder the welding joints connecting the
4-way valve assy with capillary sub-assy,
compressor and condenser; remove the 4-way
valve.
Note:
Before unsoldering the welding joint, wrap
the 4-way valve with a wet cloth completely
to avoid damage to the valve caused by high
temperature.
11. Remove compressor
Remove 3 foot nuts on compressor, and then
remove the compressor.
Note:
Protect the ports of discharge pipe and suction
pipe to avoid foreign objects to enter it.
82
Procedure
Service Manual
4-way valve assy
compressor
foot nuts
Installation and Maintenance