Gree GVA24AL-K3NNC7A/I Service Manual page 83

Steps
4. Remove axial flow blade
Remove the nut fixing axial flow blade and then
remove the blade.
5.Remove motor support sub-assy and motor
Remove the 2 screws connecting the motor
support and chassis, and then loosen the
stopper to remove the motor support.
Remove the 6 screws fixing the motor and then
remove the motor.
6. Remove electric box assy
Remove the screws fixing electric box assy ;
pull out each wiring terminal; lift the electric
box assy upwards to remove it.
Note:
When pulling out the wiring terminal, pay
attention to loose the clasp and dont pull it so
hard.
80
Procedure
nut
axial flow blade
motor support
screw
motor
screw
chassis
stopper
electric box assy
Installation and Maintenance
Service Manual